Small Volume Single Output 1000W Switching Power Supply 12V 80A Transformer AC110V or 220V TO DC SMPS for LED Light CNC Stepper

Small Volume Single Output 1000W Switching Power Supply 12V 80A Transformer AC110V or 220V TO DC SMPS for LED Light CNC Stepper
  • Продавецphiladelphiaeaglesvscarolinapanthers.us
  • Список ценUS $59.99piece
  • Продажная ценаUS $59.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,7 (537)

Oписание продукта

 

 

 

 
Feature:
 
Using microprocessor (MCU) control
 
High power density, small and beautiful appearance
 
Full metal housing, very low electromagnetic interference
 
Using the encoder to adjust the voltage and current, set the fast and accurate
 
Four digital voltmeter and ammeter, set and display exactly two digits after the decimal point
 
Active power factor correction (Active PFC), rated output power factor> 97%;
 
High efficiency, efficiency up to 90%
 
Low ripple noise, ripple peak is less than 30mV
 
Output ON / OFF switch
 
Intelligent protection: output short circuit protection, tracking overvoltage protection (Tracking OVP), tracking overcurrent protection (Tracking OCP), over temperature protection (OTP)
 
 
Specifications:
 
Operating voltage range 170 - 264Vac
Operating frequency range 45 - 65HZ
Output voltage range 0 - 60V
Output current range 0 - 17A
 
Power factor ≥ 97%
Efficiency (220Vac, full load) ≥ 89%
Full load input current (220Vac) ≤5.1A
No-load input current (220Vac) ≤ 180mA
Voltage meter accuracy ≤ 0.3% + 1 digits
Ammeter Accuracy ≤ 0.3% + 2 digit
 
Constant pressure state
Load regulation rate (0-100%) ≤ 30mV
Input voltage regulation rate (198-264Vac) ≤ 10mV
Ripple noise (Peak-Peak) ≤ 30mV
Ripple noise (r.m.s) ≤ 3mV
Set the accuracy of ≤ 0.3% + 10mV
Transient response time (50% -100% rated load) ≤ 1.0ms
 
Constant current state
Load regulation (90% -10% Rated Voltage) ≤ 50mA
Input voltage regulation rate (198-264Vac) ≤ 20mA
Ripple current noise (peak-to-peak) ≤ 30mAp-p
Set the accuracy of ≤ 0.3% + 20mA
Size (width × height × depth) 188 × 80 × 238mm
Net weight 3.0KG

 

 

aeProduct.getSubject()

aeProduct.getSubject()